Running SFC without a CD ROM

If you run sfc /scannow and get prompted to insert a CD,
there are a couple of changes you might need to make.
Slipstream your copy of WindowsXP with the latest service pack you have applied.
Once these files are on your hard drive, you can simply make a few registry changes to point to those locations.
Start Regedit
Go to the follow locations and change the path to wherever you copied the source files.
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePackSourcePath
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\SourcePath
the last one might not be necessary
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SourcePath Read More!

Turn off the Windows Picture and Fax Viewer as the Default Image Viewer

You can also change the file associations for the specific file types you want.
1.Open the Windows Explorer
2.Go to Tools / Folder Options / File Types
3.Scroll down to the extension you want to change
4.Click on the Change button
5.Select the program you want to associate with that extension
6.Click on the OK button
If the Windows Picture and Fax Viewer is set as the default for many of your graphic file types,
you can remove it so other graphics programs can be used.
1.Run Regedit
2.Go to HKEY_CLASSES_ROOT / SystemFileAssociations / image / ShellEx / ContextMenuHandlers
3.Delete the key ShellImagePreview
reg file
REGEDIT4

Code:
[-HKEY_CLASSES_ROOT\SystemFileAssociations\image\ShellEx\ContextM
enuHandlers\ShellImagePreview] Read More!

Decreasing Boot Time in windows

Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
The program is called BootVis

1.Uncompress the file.
2.Run BOOTVIS.EXE
3.For a starting point, run Trace / Next Boot + Driver Delays
4.This will reboot your computer and provide a benchmark
5.After the reboot, BootVis will take a minute or two to show graphs of your system startup.
6.Note how much time it takes for your system to load (click on the red vertical line)
7.Then run Trace / Optimize System
8.Re-Run the Next Boot + Drive Delays
9.Note how much the time has decreased
10.Mine went from approximately 39 to 30 seconds. Read More!

Hide/Unhide Logon Names

If you want to hide or unhide the names of users that are displayed on the initial logon screen:
1.Start Regedit
2.Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList
3.Add a DWORD with the name of the user account you want to hide
4.Make sure it has a value of 0
5.If there is an existing account, you can unhide it by giving it a value of 1 Read More!

Remembering Outlook / Outlook Express Password

On systems, Outlook or Outlook Express will not remember the e-mail password,
which would then need to be entered in each time.
To solve the problem:
1.Open Registry Editor
2.Go to HKEY_CURRENT_USER \ Software \ Microsoft
3.Right Click Protected Storage System Provider
4.Choose the Permissions option
5.Click the Advanced box near the bottom right hand corner. This should open another box, Towards the bottom of this box there should be two tick boxes, make sure that both of them are ticked. Click Apply, another box will open Click Yes, then Click OK and OK again.
6.Left Click the + next to Protected Storage System Provider and Delete any sub folder in this tree. (Right clicking and choose the delete option or press the delete key and choosing yes to delete)
7.Shutdown and Restart Computer. Read More!

Hiding System Tray Icons

With WindowsXP, you can manually select how you want individual icons in the System Tray to be displayed.
1.Right click on the Taskbar
2.Select Properties
3.Check Hide inactive icons
4.Click on the Customize button
5.This will bring up a dialog box that will allow you to select one of three options for your applications:
Hide when inactive, Always hide, or always show
6.Highlight current or past applications and make any changes you like.
7.A small arrow will now appear in the System Tray that will allow you to show or hide these icons. Read More!

Creating a Shutdown/Reboot Icon

WindowsXP has a program called SHUTDOWN.EXE which allows you to easily create icons to shutdown or restart your computer.
To create a shutdown shortcut on the desktop:
1.Right click on an open area of the desktop
2.Select New / Shortcut
3.Enter in "shutdown -s -t 00" - no quotes
4.Press the Next button
5.For the name, enter in anything you like. I just use shutdown. Click on the Finish button.
For a reboot, enter "shutdown -r -t 00"
Shutdown [{-l|-s|-r|-a}] [-f] [-m [\\ComputerName]] [-t xx] [-c "message"] [-d[u][p]Madx:yy]
Parameters
• -l - Logs off the current user, this is also the defualt. -m ComputerName takes precedence.
• -s - Shuts down the local computer.
• -r - Reboots after shutdown.
• -a - Aborts shutdown. Ignores other parameters, except -l and ComputerName. You can only use -a during the time-out period.
• -f - Forces running applications to close.
• -m [\\ComputerName] - Specifies the computer that you want to shut down.
• -t xx - Sets the timer for system shutdown in xx seconds. The default is 20 seconds.
• -c "message" - Specifies a message to be displayed in the Message area of the System Shutdown window. You can use a maximum of 127 characters. You must enclose the message in quotation marks. Read More!

Disabling Balloon Tips in windows

To turn off balloon tips in applications that support XP Themes:
1.Start Regedit
2.Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
3.Create a DWORD value of EnableBalloonTips
4.Give it a value of 0
reg file
REGEDIT4

Code:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explor
er\Advanced]"EnableBalloonTips"=dword:00000000
note:take backup your registry first Read More!

Automatically Ending Non-Responsive Tasks

1.Start Regedit
2.Go to HKEY_CURRENT_USER\Control Panel\Desktop\AutoEndTasks
3.Set the value to be 1
4.In the same section, change the WaitToKillAppTimeout to the number of milliseconds you want.
reg file
REGEDIT4

Code:
[HKEY_CURRENT_USER\Control Panel\Desktop]"AutoEndTasks"="1"
"WaitToKillAppTimeout"="2000" Read More!

Changing the Internet Explorer Title

1.Start Regedit
2.Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Window Title
3.Enter what you want appear in the title bar
click ok
that's it. Read More!

Win XP Tweaks

STARTUP
-----------


Windows Prefetch
******************
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management \ PrefetchParameters]

Under this key there is a setting called EnablePrefetcher, the default setting of which is 3. Increasing this number to 5 gives the prefetcher system more system resources to prefetch application data for faster load times. Depending on the number of boot processes you run on your computer, you may get benefits from settings up to 9.

Master File Table Zone Reservation
**********************************
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ FileSystem]

Under this key there is a setting called NtfsMftZoneReservation, the default setting of which is 1. The range of this value is from 1 to 4. The default setting reserves one-eighth of the volume for the MFT. A setting of 2 reserves one-quarter of the volume for the MFT. A setting of 3 for NtfsMftZoneReservation reserves three-eighths of the volume for the MFT and setting it to 4 reserves half of the volume for the MFT. Most users will never exceed one-quarter of the volume. I recommend a setting of 2 for most users. This allows for a "moderate number of files" commensurate with the number of small files included in most computer games and applications. Reboot after applying this tweak.


Optimize Boot Files
*******************
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Dfrg \ BootOptimizeFunction]

Under this key is a text value named Enable. A value of Y for this setting enables the boot files defragmenter. This setting defragments the boot files and may move the boot files to the beginning (fastest) part of the partition, but that last statement is unverified. Reboot after applying this tweak.

Optimizing Startup Programs [msconfig]
**************************************

MSConfig, similar to the application included in Win9x of the same name, allows the user to fine tune the applications that are launched at startup without forcing the user to delve deep into the registry. To disable some of the applications launched, load msconfig.exe from the run command line, and go to the Startup tab. From there, un-ticking the checkbox next to a startup item will stop it from launching. There are a few application that you will never want to disable (ctfmon comes to mind), but for the most part the best settings vary greatly from system to system.

As a good rule of thumb, though, it is unlikely that you will want to disable anything in the Windows directory (unless it's a third-party program that was incorrectly installed into the Windows directory), nor will you want to disable anything directly relating to your system hardware. The only exception to this is when you are dealing with software, which does not give you any added benefits (some OEM dealers load your system up with software you do not need). The nice part of msconfig is that it does not delete any of the settings, it simply disables them, and so you can go back and restart a startup application if you find that you need it. This optimization won't take effect until after a reboot.

Bootvis Application
*******************
The program was designed by Microsoft to enable Windows XP to cold boot in 30 seconds, return from hibernation in 20 seconds, and return from standby in 10 seconds. Bootvis has two extremely useful features. First, it can be used to optimize the boot process on your computer automatically. Second, it can be used to analyze the boot process for specific subsystems that are having difficulty loading. The first process specifically targets the prefetching subsystem, as well as the layout of boot files on the disk. When both of these systems are optimized, it can result in a significant reduction in the time it takes for the computer to boot.

Before attempting to use Bootvis to analyze or optimize the boot performance of your system, make sure that the task scheduler service has been enabled – the program requires the service to run properly. Also, close all open programs as well – using the software requires a reboot.

To use the software to optimize your system startup, first start with a full analysis of a fresh boot. Start Bootvis, go to the Tools menu, and select next boot. Set the Trace Repetition Settings to 2 repetitions, Start at 1, and Reboot automatically. Then set the trace into motion. The system will fully reboot twice, and then reopen bootvis and open the second trace file (should have _2 in the name). Analyze the graphs and make any changes that you think are necessary (this is a great tool for determining which startup programs you want to kill using msconfig). Once you have made your optimizations go to the Trace menu, and select the Optimize System item. This will cause the system to reboot and will then make some changes to the file structure on the hard drive (this includes a defragmentation of boot files and a shifting of their location to the fastest portion of the hard disk, as well as some other optimizations). After this is done, once again run a Trace analysis as above, except change the starting number to 3. Once the system has rebooted both times, compare the charts from the second trace to the charts for the fourth trace to show you the time improvement of the system's boot up.

The standard defragmenter included with Windows XP will not undo the boot optimizations performed by this application.


NOTE:This setting will not take effect until after you reboot your system.
Read More!

Repairing Damaged Winsock2

The symptoms when Winsock2 is damaged show when you try to release and renew the IP address using IPCONFIG...

And you get the following error message:

An error occurred while renewing interface 'Internet': An operation was attempted on something that is not a socket.

Also Internet Explorer may give the following error message:
The page cannot be displayed Additionally, you may have no IP address or no Automatic Private IP Addressing (APIPA) address, and you may be receiving IP packets but not sending them.

There are two easy ways to determine if Winsock2 is damaged:

From the XP source files, go to the Support / Tools directory

Winsock Test Method 1
Run netdiag /test:winsock

The end should say Winsock test ..... passed

Winsock Test Method 2

Run Msinfo32
Click on the + by Components
Click on the by Network
Click on Protocol
There should be 10 sections if the Winsock2 key is ok
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...

If the names are anything different from those in this list, then likely Winsock2 is corrupted and needs to be repaired.
If you have any 3rd party software installed, the name MSAFD may be changed.
There should be no fewer than 10 sections.

To repair Winsock2

Run Regedit
Delete the following two registry keys:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

Restart the computer
Go to Network Connections
Right click and select Properties
Click on the Install button
Select Protocol
Click on the Add button
Click on the Have Disk button
Browse to the \Windows\inf directory
Click on the Open button
Click on the OK button
Highlight Internet Protocol (TCP/IP)
Click on the OK button
Reboot Read More!

Reduce Startup Time, Decrease in windows XP

By default, Microsoft includes the /prefetch:1 switch to speed up it's Windows Media Player application start time. This switch can be used for other Windows applications and also many third party programs.

Example #1

You have AOL 8.0 installed on the computer. Complete the steps outlined bewlo to add the /prefetch:1 switch to AOL's Target path.

1. Right click on the AOL shortcut and select properties from the menu.

2. In the Target: Field add the /prefetch:1 switch to the very end of the path, like this: "C:\Program Files\America Online 8.0\aol.exe" /prefetch:1 and then click ok.

Now start AOL. It would load at least 50 times faster than ever before.

Example #2

1, Go to the Start button/All Programs/Accessories/System Tools

2. Right click on System Restore and select properties from the menu that appears. Add the /prefetch:1 to the Target Path entry so it looks like this %ystemRoot%\System32\restore\rstrui.exe /prefetch:1 and click ok.

Now System Restore will start immediately when executed.

Note: This switch will only work with some programs. Others will return a message saying the program in the target box is invalid. Just remove the switch Read More!

Hidden Back-up utility in Win XP .

Insert your windows XP disc into your PC.

Click exit if your installation screen comes up.

Now go too your CD drive in *My Computer*. Right-click and select open.

Choose VALUE ADD\MSFT\NT BACK-UP FILE.

In the *files of type* drop down list be sure that *select all files* is on.

Click on the NTBACK-UP.msi file and click okay.

Click the finish button and now go over too the start button\ALL PROGRAMS\ACCESSORIES\SYSTEM TOOLS\ and there it is now.. BACK-UP FILES...

Great little tool that Microsoft never should have hidden.


Win XP Tip, Rename Multiple Files

A new, small, neat feature for winXP deals with renaming files. I personally have always wanted the OS to include a way to do a mass file renaming on a bunch of files. You can now rename multiple files at once in WinXP. Its real simple:

1. Select several files in Explorer, press F2 and rename one of those files to something else. All the selected files get renamed to the new file name (plus a number added to the end).

2. Thats it. Simple huh.

I would recommend that you only have the files you want to rename in the directory your working in. I would also recommend that until you get used to this neat little trick that you save copies of the files in a safe location while your getting the hang of it.

Ever wonder what's going on behind that splash screen? Well, now you can find out!

Right click My Computer, Properties, Advanced, Startup and Recovery, Edit. Edit BOOT.INI. Add "/SOS" right after "/fastdetect" with a space between. The line will look something like this:


multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /SOS
. Then you're finished. The first part, multi(0)..... may not be the same on your machine. Upon restarting, the splash screen will be gone. It can be re-enabled by removing the new switch. Read More!

WINDOWS XP Hidden Applications

To run any of these apps go to Start > Run and type the executable name (ie charmap).

WINDOWS XP HIDDEN APPS:
=========================================

1) Character Map = charmap.exe (very useful for finding unusual characters)

2) Disk Cleanup = cleanmgr.exe

3) Clipboard Viewer = clipbrd.exe (views contents of Windows clipboard)

4) Dr Watson = drwtsn32.exe (Troubleshooting tool)

5) DirectX diagnosis = dxdiag.exe (Diagnose & test DirectX, video & sound cards)

6) Private character editor = eudcedit.exe (allows creation or modification of characters)

7) IExpress Wizard = iexpress.exe (Create self-extracting / self-installing package)

8) Microsoft Synchronization Manager = mobsync.exe (appears to allow synchronization of files on the network for when working offline. Apparently undocumented).

9) Windows Media Player 5.1 = mplay32.exe (Retro version of Media Player, very basic).

10) ODBC Data Source Administrator = odbcad32.exe (something to do with databases)

11) Object Packager = packager.exe (to do with packaging objects for insertion in files, appears to have comprehensive help files).

12) System Monitor = perfmon.exe (very useful, highly configurable tool, tells you everything you ever wanted to know about any aspect of PC performance, for uber-geeks only )

13) Program Manager = progman.exe (Legacy Windows 3.x desktop shell).

14) Remote Access phone book = rasphone.exe (documentation is virtually non-existant).

15) Registry Editor = regedt32.exe [also regedit.exe] (for hacking the Windows Registry).

16) Network shared folder wizard = shrpubw.exe (creates shared folders on network).

17) File siganture verification tool = sigverif.exe

18) Volume Contro = sndvol32.exe (I've included this for those people that lose it from the System Notification area).

19) System Configuration Editor = sysedit.exe (modify System.ini & Win.ini just like in Win98! ).

20) Syskey = syskey.exe (Secures XP Account database - use with care, it's virtually undocumented but it appears to encrypt all passwords, I'm not sure of the full implications).

21) Microsoft Telnet Client = telnet.exe

22) Driver Verifier Manager = verifier.exe (seems to be a utility for monitoring the actions of drivers, might be useful for people having driver problems. Undocumented).

23) Windows for Workgroups Chat = winchat.exe (appears to be an old NT utility to allow chat sessions over a LAN, help files available).

24) System configuration = msconfig.exe (can use to control starup programs)

25) gpedit.msc used to manage group policies, and permissions Read More!